This is the all new critic acclaimed 801 Fusion Punch! Cartomizer.
They are rated at 3.0Ω and delivers thunderous actual feel (TH) along with robust flavor and dense vapor production and is recommended for voltages between 3.7 through 5.5V
The Fusion Punch! Brings everything to the tank table and more! With 2 precisely well placed holes measuring a discreet 1.05mm on each side of the unit and 10.5 mm from the bottom base of the 801 connector is Guaranteed not to over fill or let your Fusion run dry. 70/30 PG/VG ratios from Ikenvape e-liquid, Vapalicious juice and Bombay Vaping have been tested
Compatible with 510/901 Drip Tips ONLY Not compatible with 510-801 Stealth Gold adapter. Though we have developed specific 510-801 Stealth adapters for All Fusion models located in Fusion Series
Drip tip is highly recommended for Tank use. HOW TO USE IN TANKS: On the tank you will see a cut out on one of the endcaps. This is where the cartomizer is inserted. Slide it in, fill up the tank and apply the top cap. Remove it once and apply it back on. This will give preferred wicking and create a vacuum effect. Around the 3rd refill and thereafter. You will notice the liquid start to pool up in the center of the cartomizer when you apply the top cap. When this happens (with the top cap firmly on) turn the entire unit upside down and let the excess fall out. There should only be a few drip or a minimal short stream at max. The 510 fusion is a little tighter in draw and more optimized for tanks, I have the batting set lower and tighter so the excess can easily fall out. When the excess is drained. Apply the drip tip and go through your own routine.